|
This
is a white, injection molded plastic tread which serves as an original equipment tread
option for most S.R.SMITH residential ladders. They are suitable for use in most
geographic areas. The white, injection molded Econoline™ tread is 3" (76mm) in
width at the left and right edges of the tread and 3 3/8" (.38"/86mm) at the
tread center providing a wider (at center) foot rest for safety. It is 17.25" (438mm)
in length at the centerline of the tread to provide a nominal 19" (483mm) centerline
mounting distance for the anchors of the ladder. The tops, sides and indented top surfaces
of the treads feature a skid /slip-resistant surface for further safety and additional
durability. Because of its reinforced mounting posts and a unique combination of a
cross-hatch pattern of reinforcing bars and a horizontal reinforcing bar, the
Econoline™ tread is the strongest and most durable tread available. |
| Priced at
$22.50 |
|
This unit is
packaged for single unit sales and includes no mounting hardware.
LTDF101 |
|
|
|
This
is a white, blow molded plastic tread which serves as a mid-range replacement tread. They
are suitable for use in most geographic areas. The molded white, blow molded plastic tread
is 4" (102mm) in width and 18" (457mm) in length at the tread centerline to
provide a nominal 20" (508mm) centerline mounting distance for the anchors of the
ladder. The top of the tread features a series of textured protrusions to provide a
skid/slip-resistant surface for safety. Strength results from the tread's 1.75"
(44.5mm) thickness and its double-fold underside walls. |
| Priced at $22.50 |
|
This unit is
packaged for single unit sales and includes no mounting hardware.
BLOW MOLD |
|
|
|
This
is a white, high-impact plastic tread which serves as a low-range replacement tread. They
are suitable for use in most geographic areas.The molded white, high-impact plastic
(H.I.P.) tread is 3" (76mm) in width and 18" (457mm) in length at the tread
centerline to provide a 20" (508mm) centerline mounting distance for the anchors of
the ladder. The tops, sides and indented top surfaces of the treads feature a skid
/slip-resistant surface for safety. Strength and durability are enhanced by a series of
reinforcing bars on the underside of the tread. |
| Priced at $16.90 |
|
This unit is
packaged for single unit sales and includes no mounting hardware.
SR. SMITH swan tread |
|
|
|
This
is a polished stainless steel tread which serves as an original equipment tread option for
most S.R.SMITH residential and commercial ladders. They are suitable for use in most
geographic areas. The 304 stainless steel polished Elite™ Tread is 3" (76mm) in
width and 18.25" (464mm) in length at the tread centerline to provide a nominal
20" (508mm) centerline mounting distance for the anchors of the ladder. Strategic
bends of the heavy-duty stainless steel provide the tread's unmatched strength.
Contrasting beauty, sure-footing and secure mounting of the Elite™ tread to the
ladder frame is enhanced by a replaceable, black non-skid, Cool-Touch™ injection
molded, tread insert at the top and caps at either end of the tread. |
| Priced at $31.90 |
|
This unit is
packaged for single unit sales and includes no mounting hardware.
ELITE |
|
|
|
This
is a molded rubber bumper suitable for use in protecting finished and tile wall faces,
vinyl liners and fiberglass surfaces on residential and commercial installations in most
geographic areas. |
|
This is a molded
rubber bumper intended for use only on certain equipment in protecting finished and tile
wall faces, vinyl liners and fiberglass surfaces on residential and commercial
installations in most geographic areas. |
| Priced at
$3.80 |
|
MALE BUMPER |
|
|
|
| Priced at $3.80 |
|
FEMALE BUMPER |
|
|
|
