Turn pump off. Secure clamp assembly on the return
line.
Cut hole in rigid PVC pipe using a power drill and the
hole saw that is provided.
Insert the flow diverter into hole and snap it into
place.
Snap dispenser shell onto clamp.
Thread the purifier cartridge into the clamp; turn on
pool pump and activate the cartridge.
Low Chlorine Maintenance Recipe
WHEN:
WHAT TO DO:
Every Day
Run the pump and filter system with your automatic pool
cleaner and Nature2 APC at least 6 hours daily.
Once a Week
Balance the pH and Total Alkalinity.
Twice a Week
Check the free chlorine residual, add chlorine to
maintain a 0.4 to 0.6 free PPM range.
As Needed
If the water starts to look hazy, "shock" the
pool using 1 lb. granular chlorine or 1 gallon liquid chlorine or 1 lb. non-chlorine
oxidizer per 10,000 gallons of water. Add cyanuric acid as needed to maintain 50 PPM.
After heavy use or rainstorms additional shocking is recommended.
Seek to reduce your chlorine level by 50% to 80% versus the
chlorine levels you would maintain without Nature2.